Reese Wraps™ 500D CORDURA® MultiCam® AN/PVS-14 Night Vision Wraps. Military Grade Protection & Camouflage For Your Night Vision Device.
Reese Wraps™ are made from genuine MultiCam® 500D (Denier) CORDURA® fabric that is made to meet or exceed the physical military requirements of mil std: MIL-DTL-32439 Type III, Class 3. CORDURA® brand fabrics are used extensively in military combat gear and are engineered to deliver exceptional resistance to abrasion, puncture, tears and is Poly-coated for water resistance. Our MultiCam® is sourced only from official CORDURA® authorized suppliers. Reese Wraps™ are 100% Made in the USA, Berry Compliant and use IR Compliant material. Our 3M™ adhesive backing insures long lasting performance.
Reese Wraps™ are professionally 3D scanned, precisely measured and laser cut to give your accessories the most coverage possible. All of our products are made using 3M adhesive backed 500D CORDURA® and all patterns are officially licensed.
Installation Tips:
•Step 1: Wash your hands with soap and water to ensure nothing will be transferred from your hands to the 3M adhesive that would interfere with the wrap adhering to your product.
•Step 2: Using the provided alcohol swab, wipe down the entire surface of your product and allow it to completely dry.
•Step 3: Remove the wrap’s backing to expose the adhesive. For best results, use a pair of flat-tip tweezers.
•Step 4: Choose a starting point. We recommend selecting a straight edge or a cut-out as the best guide for proper alignment. Heat will help if needed.
•Step 5: Gently press the wrap into place working your way from one side to the other. The wrap can be easily lifted, adjusted and reapplied as needed, during the initial placement.
•Step 6: Once you are happy with the wrap’s placement, firmly press down on the Cordura over your entire product. The 3M adhesive is pressure and time activated. After it is pressed down firmly, it takes approximately 24 hours to “cure”.
